Industrial HVLS fans up to 24 feet across, engineered for warehouses, plants and distribution centers — sold direct, without the brand premium. One 1.5 kW motor conditions 22,000 square feet. Your ceiling does not care whose logo is on the hub.
Hot air stacks at the roof and your heaters chase it all winter. An HVLS fan pushes it back down. Put your building in and see the order of magnitude before anyone calls you.
Directional estimate for budgeting. We model the real building — bay spacing, obstructions, dock doors — during quoting.
Assumes 10 hr/day × 260 days of fan operation, published destratification savings of 20–30% on heating load, and ASHRAE 55 air-speed cooling effect. Savings shown are net of fan electricity. Not a guarantee, and not a substitute for an energy audit.
Cheap on the invoice, not on the paperwork. If you have ever had a vendor go quiet when you asked for a dimensional drawing, this section is for you.
Every unit ships with a variable frequency drive speaking Modbus RTU and BACnet MS/TP. Schedule it, interlock it with your unit heaters, trend it — no proprietary wall pod, no licensed controller you can only buy from us.
Cut sheets, dimensional drawings, mounting details and electrical schedules — sent as one PDF, not five emails.
Redundant safety cable plus retention brackets at the hub and every airfoil root. Nothing about the fan depends on one fastener.
Sealed helical gearbox. No annual drain-and-fill, no lift rental, no line item your CMMS has to carry forever.
Quoted to your dock, staged to land when your install crew and lift are actually booked.
Specifications are targets for the first production run and are subject to change before launch. Final submittal documents govern.
Not by catalog page, and not by whichever one a rep is compensated on this quarter.
Figures shown are target specifications for the first production run. Pricing publishes at launch — the list gets it a week early, with volume and multi-site tiers.
Every procurement officer asks it in the first ten minutes. Here is the answer before you have to.
We don't sponsor a stadium, a race team, or a golf tournament. There is no brand premium riding along on your freight bill. The fan is the product; the marketing isn't.
You size it on this page in ten minutes and talk to an engineer when you're ready. No territory rep, no six-week discovery, no quote that arrives as "call for pricing."
Cast aluminum hub, sealed helical gearbox, six extruded airfoils, an off-the-shelf drive. Nothing proprietary means nothing you can only buy back from us at our price in year seven.
Send square footage, ceiling height and bay spacing. You get a fan layout and load calculation back in two business days.
Cut sheets, dimensional drawings and electrical schedules go to your engineer of record as one packet.
Net terms for established accounts. Three to four week build, freight quoted to your dock, not "TBD at shipping."
One building or forty. Same drawings, same SKUs, staged delivery matched to your install schedule.
Tell us the building. We'll come back with a layout, a load calculation, and a number — a week before anyone else sees one.
We'll email you with pricing and a layout for your square footage — a week before the site goes public. Go move some air in the meantime.
The name's a joke. The fan moves 350,000 CFM on a sealed helical gearbox and ships with a submittal packet. Tell your VP of Operations about whichever one lands better.
Direct sales, no field territory team, no sponsorship spend, and no proprietary parts we can mark up on the back end. The money goes into the hub, the gearbox and the safety cabling, which is where a fan actually earns its keep.
That's the plan for every unit: a VFD speaking Modbus RTU and BACnet MS/TP, so your BAS schedules and interlocks the fan like any other piece of equipment. Final points list ships with the submittal packet.
No, and you probably don't want us to. It's a fan on a mount — any commercial electrician or steel crew that has hung a unit heater can hang one. Mounting kit and instructions ship in the crate, and at launch we'll publish a list of installers who have done ours.
Motor and gearbox terms publish with pricing. We would rather post a number we can stand behind for fifteen years than put one here and quietly shave it later.
That's the case we're built for — one drawing set, one SKU list, staged delivery per site. Put your building count on the list and you'll get multi-site pricing with the launch numbers.
Rule of thumb: fan diameter no more than half your shortest bay dimension, 10 ft of floor clearance under the blades, 3 ft from blade tip to the nearest obstruction. Send square footage and bay spacing and we'll lay it out properly.